Black corrugated rubber suction and discharge hose, tied into a three-loop coil with one clearly visible open end. — Supplier product image
Supplier product photograph. The selected size, material and configuration are confirmed with the quotation.
Open image at full size ↗ · Image source

Piping materials · Hose & flexible connections

Rubber suction and delivery hose

Reinforced rubber hose for a specified suction or delivery duty, with construction chosen for the transferred material and handling conditions.

Reference model / family: EPDM suction / delivery hose reference

Common uses

Pump connections, water transfer and suitable industrial suction or discharge assemblies.

Specifications & documents Add to quote

Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.

Product information

Specifications & documents

Download product guide (PDF)

EPDM suction / delivery hose reference

Liner and cover: Conductive EPDM
Reinforcement: Textile cords with embedded steel helix
Temperature range: −40 to +100 °C; chemical-dependent
Vacuum duty: Confirm the specific vacuum rating at operating temperature

EPDM suction / delivery hose reference
ID — mm	OD — mm	Bend radius — mm	Mass — kg/m
25	36	100	0.73
32	43	128	0.86
38	49	152	1
51	62	204	1.3
63	76	252	2.09
76	89	304	2.5
102	116	408	3.48
127	143	635	5.33
152	168	760	6.66
203	221	812	9.88
254	272	1270	13.52

Download this size table (CSV)

Dimensional reference from the linked catalogue. It uses IH-RWSD in the heading and IH-RWS in the size table; confirm the current supplied part code and vacuum rating before specifying an assembly.

Technical references

Suction hose dimensions · page 9 ↗Drawing / dimensions · Confirm document region for the quoted product · Current revision confirmed with quotation

Choose the right variant

Details to confirm

Fluid or solids and operating temperature
Bore, length, vacuum and working pressure
Bend radius, end connections and handling conditions

Selection note

Confirm both vacuum and pressure capability for the offered hose. A corrugated cover or black rubber appearance does not establish chemical compatibility.

These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.

Add to your quote list

Include what you know. Leave anything uncertain blank and we’ll help clarify it.

QuantityUnitCut length per piece (optional)

Bore / inside diameter — mmMeasure the clear opening; do not substitute the nominal size.Length per item — mSpecify each cut length or coil length, then use Quantity for the number required.End connectionsSpecify both ends and any male/female, thread, socket, flange or coupling details.

More specifications (optional)

Open these fields if you have measurements, a matching reference or a site specification.

Outside diameter — mmMeasure across the outside of the pipe or tube.Wall thickness — mmState whether measured or taken from the marked pipe specification.Hose constructionReinforcement, helix, braid, liner or tubing material.Required pressure / vacuum dutyState working pressure and vacuum separately, with units; include minimum bend radius if critical.Service / operating conditionsFluid, working pressure or vacuum, temperature and any required approvals.

Enter OD and wall thickness, where known, to calculate an indicative bore. Dimensions are in millimetres.

Additional requirementsView quote list

Have an existing part to match?

Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.

Send a photo or enquiry

Rubber suction and delivery hose

Common uses

Specifications & documents

EPDM suction / delivery hose reference

Details to confirm

Add to your quote list

Related product types

Water hose

Spiral suction hose

Air hose

Have an existing part to match?