Supplier product image
Supplier photograph: AETP hydraulic hose assembly photograph. Representative configuration; the dimensions and ratings below apply to the identified reference model. Confirm the exact supplied item with your quote.
Open image at full size ↗ · Image source

Piping materials · Hose & flexible connections

Hydraulic hose assemblies

Hydraulic hose assemblies combine a pressure-rated hose with matched end fittings for a defined hydraulic circuit.

Reference model / family: AETP 22-1113 hydraulic hose assembly reference

Common uses

Mobile machinery, power packs and hydraulic plant maintenance.

Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.

Product information

Specifications & documents

Download product guide (PDF)

AETP 22-1113 hydraulic hose assembly reference

Hose nominal bore: 1/2 in
Assembly length: 1 m
Thread family: BSP
Hose standard: SAE 100 R2 AT
Reinforcement: Double wire braid
Fitting attachment: Swaged fittings
End fittings: Swivel nut at both ends

Reference model/family only. These published dimensions and limits do not apply to every product in this category; confirm the supplied configuration with the quotation. The listing does not give assembly working pressure; confirm the rating of the complete selected assembly.

Technical references

All Engine & Tractor Parts — 22-1113 ↗Manufacturer / supplier reference · Confirm document region for the quoted product · Current revision confirmed with quotation

Choose the right variant

Details to confirm

Hose size, pressure and fluid
Overall length and fitting orientation
Thread, seat type and bend radius

Selection note

Provide a sample or clear end-connection photos; thread size alone does not identify the seal.

These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.

Add to your quote list

Include what you know. Leave anything uncertain blank and we’ll help clarify it.

QuantityUnitCut length per piece (optional)

Bore / inside diameter — mmMeasure the clear opening; do not substitute the nominal size.Length per item — mSpecify each cut length or coil length, then use Quantity for the number required.End connectionsSpecify both ends and any male/female, thread, socket, flange or coupling details.

More specifications (optional)

Open these fields if you have measurements, a matching reference or a site specification.

Outside diameter — mmMeasure across the outside of the pipe or tube.Wall thickness — mmState whether measured or taken from the marked pipe specification.Hose constructionReinforcement, helix, braid, liner or tubing material.Required pressure / vacuum dutyState working pressure and vacuum separately, with units; include minimum bend radius if critical.Service / operating conditionsFluid, working pressure or vacuum, temperature and any required approvals.

Enter OD and wall thickness, where known, to calculate an indicative bore. Dimensions are in millimetres.

Additional requirementsView quote list

Have an existing part to match?

Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.

Send a photo or enquiry

Hydraulic hose assemblies

Common uses

Specifications & documents

AETP 22-1113 hydraulic hose assembly reference

Details to confirm

Add to your quote list

Related product types

Water hose

Spiral suction hose

Air hose

Have an existing part to match?