Supplier product image
Supplier photograph: PASSIONHOSE chemical suction and discharge hose photograph. Representative configuration; the dimensions and ratings below apply to the identified reference model. Confirm the exact supplied item with your quote.
Open image at full size ↗ · Image source

Piping materials · Specialist hose & tubing

Chemical-service hose

Chemical-service hose uses a selected liner, reinforcement and cover for a defined chemical duty.

Reference model / family: IH-RCS chemical hose reference

Common uses

Chemical transfer, dosing equipment and bulk liquid handling.

Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.

Product information

Specifications & documents

Download product guide (PDF)

IH-RCS chemical hose reference

Liner: UHMWPE
Cover: EPDM/SBR rubber
Reinforcement: Synthetic cord, wire helix and anti-static copper wire
Temperature reference: −20 to +80 °C; fluid-specific compatibility required

IH-RCS chemical hose reference
ID — mm	OD — mm	Bend radius — mm	Mass — kg/m
19	31	65	0.66
25	38	70	0.8
32	44	90	0.9
38	51	100	1.25
51	65	135	1.66
64	78	170	2.1
76	92	205	2.72
102	118	275	4.08

Download this size table (CSV)

Reference configuration only. Dimensions and ratings apply to this documented series; the offered item is confirmed with your quote.

Technical references

Chemical hose dimensions · page 12 ↗Drawing / dimensions · Confirm document region for the quoted product · Current revision confirmed with quotation

Choose the right variant

Details to confirm

Chemical name and concentration
Temperature, pressure or vacuum
Length, bore and transfer environment

Selection note

Compatibility must cover the hose liner, seals and couplings at the actual concentration and temperature.

These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.

Add to your quote list

Include what you know. Leave anything uncertain blank and we’ll help clarify it.

QuantityUnitCut length per piece (optional)

Bore / inside diameter — mmMeasure the clear opening; do not substitute the nominal size.Length per item — mSpecify each cut length or coil length, then use Quantity for the number required.End connectionsSpecify both ends and any male/female, thread, socket, flange or coupling details.

More specifications (optional)

Open these fields if you have measurements, a matching reference or a site specification.

Outside diameter — mmMeasure across the outside of the pipe or tube.Wall thickness — mmState whether measured or taken from the marked pipe specification.Hose constructionReinforcement, helix, braid, liner or tubing material.Required pressure / vacuum dutyState working pressure and vacuum separately, with units; include minimum bend radius if critical.Service / operating conditionsFluid, working pressure or vacuum, temperature and any required approvals.

Enter OD and wall thickness, where known, to calculate an indicative bore. Dimensions are in millimetres.

Additional requirementsView quote list

Have an existing part to match?

Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.

Send a photo or enquiry

Chemical-service hose

Common uses

Specifications & documents

IH-RCS chemical hose reference

Details to confirm

Add to your quote list

Related product types

Water hose

Spiral suction hose

Air hose

Have an existing part to match?