Cold-mix bitumen repair bags
Bagged cold-mix asphalt for repairs within the selected product’s application limits.
Original supplier image: Cement Australia Concrete Mix, 20 kg bag. The quoted model, size and configuration may differ.
Open image at full size ↗ · Image sourceChemicals & building materials · Bagged materials & grout
Bagged concrete mix
Pre-blended dry concrete mix in bags for compatible small concrete works.
Reference model / family: Bagged concrete mix — reference specifications
Common uses
Suitable footings, pads and general concreting within the selected mix specification.
Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.
Product information
Specifications & documents
Bagged concrete mix — reference specifications
- Reference product
- Cement Australia Concrete Mix, 20 kg bag
- Pack size
- 20 kg bag
- Composition
- Preblended cement, sand and aggregate.
- Typical uses
- Paths, small garden slabs, footings, posts and garden edges.
- Mixing water
- Start with 1.75 L clean water per bag; add only small ~100 mL increments if essential for workability. Excess water weakens concrete.
- Coverage
- Two 20 kg bags make approximately a 450 × 500 mm slab at 75 mm thickness.
- Curing and access
- Keep moist for 7 days; formwork may be removed after 24 hours. Do not walk on it for at least 3 days.
- Placement temperature
- Avoid mixing or placing below 5°C or above 35°C.
Water addition, curing and coverage are for this reference mix. Follow the current bag instructions and project specification; no universal structural strength rating is implied.
Technical references
- Reference product information ↗Manufacturer / supplier reference · Confirm document region for the quoted product · Current revision confirmed with quotation
- Product data sheet ↗Product data sheet · Confirm document region for the quoted product · Current revision confirmed with quotation
- Safety data sheet ↗Safety data sheet · Confirm document region for the quoted product · Current revision confirmed with quotation
Need the current Australian safety data sheet? Request the SDS for the quoted product. Check each component of two-part products before use.
Choose the right variant
Details to confirm
- Application and required strength
- Bag size and total volume
- Quantity and delivery
Selection note
Use the selected mix’s stated water ratio, placement and curing instructions; strength depends on those conditions.
These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.
Add to your quote list
Include what you know. Leave anything uncertain blank and we’ll help clarify it.
Have an existing part to match?
Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.