Supplier product image
Photograph © Hunter Industries: Hunter PGV-101-MM-B / PGV101MMB — 1 in male BSP irrigation valve with flow control and AC solenoid. The quoted model and connections are confirmed with your enquiry.
Open image at full size ↗ · Image source

Valves & instrumentation · Irrigation

Irrigation solenoid valves

Automatic irrigation valves with solenoids matched to the selected controller and water conditions.

Reference model / family: Irrigation solenoid valves — reference specifications

Common uses

Switching suitable irrigation zones.

Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.

Product information

Specifications & documents

Download product guide (PDF)

Irrigation solenoid valves — reference specifications

Reference product: Hunter PGV-101-MM-B / PGV101MMB — 1 in male BSP irrigation valve with flow control and AC solenoid
Reference: PGV-101-MM-B; SKU PGV101MMB
Inlet: 1 in (25 mm) male BSP
Outlet: 1 in (25 mm) male BSP
Control: 24 VAC solenoid; manual flow control
Flow range: 0.7–150 L/min (manufacturer also lists 0.05–9 m³/h)
Recommended pressure: 150–1000 kPa (1.5–10 bar)
Temperature rating: 66 °C
50 Hz solenoid current: 370 mA inrush; 210 mA holding

Specifications refer to the male BSP, 24 V AC flow-control model. Match the controller output, minimum operating pressure and water quality to the selected valve.

Technical references

Reference product information ↗Manufacturer / supplier reference · Confirm document region for the quoted product · Current revision confirmed with quotation
Exact-model specification sheet ↗Manufacturer / supplier reference · Confirm document region for the quoted product · Current revision confirmed with quotation
PGV operating specifications ↗Manufacturer / supplier reference · Confirm document region for the quoted product · Current revision confirmed with quotation

Choose the right variant

Details to confirm

Connection size and water conditions
Flow pressure and solenoid supply
Controller model and quantity

Selection note

Specify the exact solenoid voltage and type. Minimum operating pressure and flow limits depend on the valve model.

These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.

Add to your quote list

Include what you know. Leave anything uncertain blank and we’ll help clarify it.

QuantityUnitCut length per piece (optional)

Nominal size / designationCopy the marked DN, NPS, thread or model size; nominal size is not a measured diameter.Thread / flange standardInclude BSP/NPT and male/female, or flange Table/class and drilling.Service / operating conditionsFluid, working pressure or vacuum, temperature and any required approvals.

More specifications (optional)

Open these fields if you have measurements, a matching reference or a site specification.

Bore / inside diameter — mmMeasure the clear opening; do not substitute the nominal size.End connectionsSpecify both ends and any male/female, thread, socket, flange or coupling details.Face-to-face / overall length — mmUseful when replacing a valve between fixed pipework.Material / gradeInclude the grade, coating or finish where known.Seat / seal materialSpecify known material or describe the fluid and temperature.Operation / actuatorLever, handwheel, gear, pneumatic or electric; include fail position if required.

Additional requirementsView quote list

Have an existing part to match?

Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.

Send a photo or enquiry