PVC-U pressure pipe
PVC-U pressure pipe is rigid unplasticised PVC used in compatible water and process pipework. It is joined using a matched pipe-and-fitting system.
Supplier photograph: Matrix yellow-stripe gas polyethylene pipe photograph. Representative configuration; the dimensions and ratings below apply to the identified reference model. Confirm the exact supplied item with your quote.
Open image at full size ↗ · Image sourcePiping materials · Plastic pipe
HDPE pipe — yellow stripe
Yellow-striped polyethylene pipe is commonly associated with gas service and must be matched to the applicable system requirements.
Common uses
Approved gas-distribution and related site pipework.
Add this item to the rest of your list. KEPCO coordinates the supplier enquiries and confirms availability and lead time with your quote.
Product information
Specifications & documents
- Configuration options
- Specified PE grade, SDR, pipe length and approved joining system.
- Application
- Approved gas-distribution and related site pipework.
Use the dimension tables below to select a standard and size. Confirm material, tolerance and operating limits for the offered item.
Technical references
- Vinidex Capability & PE100 Polyethylene Pipe Dimensions (Based on AS/NZS 4130), VIN006 ↗Drawing / dimensions · Confirm document region for the quoted product · Current revision confirmed with quotation
- PE pipe diameter series ↗Product data sheet · Confirm document region for the quoted product · Current revision confirmed with quotation
- Vinidex Capability & PE100 Polyethylene Pipe Dimensions (Based on AS/NZS 4130), VIN006 ↗Drawing / dimensions · Confirm document region for the quoted product · Current revision confirmed with quotation
- PE pipe diameter series ↗Product data sheet · Confirm document region for the quoted product · Current revision confirmed with quotation
Size reference
Pipe dimensions
Choose a standard and size to check the reference dimensions. Use the measurements that match your existing part or project specification.
| Size | Outside Ø | Minimum wall | Reference mean ID* |
|---|---|---|---|
| 20 mm OD | 20 | 1.9 | 16 |
| 25 mm OD | 25 | 2.3 | 20 |
| 32 mm OD | 32 | 2.9 | 26 |
| 40 mm OD | 40 | 3.7 | 32 |
| 50 mm OD | 50 | 4.6 | 40 |
| 63 mm OD | 63 | 5.8 | 51 |
| 75 mm OD | 75 | 6.8 | 61 |
| 90 mm OD | 90 | 8.2 | 73 |
| 110 mm OD | 110 | 10 | 89 |
| 125 mm OD | 125 | 11.4 | 101 |
| 140 mm OD | 140 | 12.7 | 114 |
| 160 mm OD | 160 | 14.6 | 130 |
| 180 mm OD | 180 | 16.4 | 145 |
| 200 mm OD | 200 | 18.2 | 162 |
| 225 mm OD | 225 | 20.5 | 183 |
| 250 mm OD | 250 | 22.7 | 203 |
| 280 mm OD | 280 | 25.4 | 228 |
| 315 mm OD | 315 | 28.6 | 256 |
Mean ID is the source reference rounded to whole millimetres; it is not OD minus twice the minimum wall. This is metric Series 1; stripe colour does not establish the pipe series.
Dimension sources and scope
PE100 Series 1 reference OD20–315, SDR11/17. Confirm the exact series and pipe marking, particularly for gas service. Published mean ID is not a guaranteed bore.
- Vinidex Capability & PE100 Polyethylene Pipe Dimensions (Based on AS/NZS 4130), VIN006 ↗
- PE pipe diameter series ↗
Reference checked September 2026. Final dimensions, tolerances, material and operating rating are confirmed for the offered item.
Choose the right variant
Details to confirm
- Gas service and required approvals
- Outside diameter, grade and SDR
- Compatible jointing system
Selection note
Select a gas-approved pipe system for the intended application; colour is not evidence of approval.
These details describe the product family. The offered item’s dimensions, materials, operating limits and required approvals are confirmed before you order.
Add to your quote list
Include what you know. Leave anything uncertain blank and we’ll help clarify it.
Have an existing part to match?
Send a photo, part number or description with your list. We’ll help identify it and follow up suitable suppliers.